Skip to content 
Energy efficiency and stability are just more than buzzwords – they are important for each house and business. When the increase in energy bills and climate change become a press question, there are several people who are looking for ways to effectively heat their properties without increasing their carbon footprint. A solution that is gaining popularity in the UK is an air source high-temperature heat pump.
This modern heating technology can also provide heat in the coldest seasons, making it a smart alternative to traditional boilers. But what is a high temperature heat pump, how it works, and why do the owners switch to so many households to it? Let’s find out everything needed to learn about this innovative heating system, including professionals and opposition, work mechanisms, and cost factors.
What is a High Temperature Air Source Heat Pump?
An air source high temperature heat pump is a heating system that removes the heat from the air and moves it to heat the house, unlike the traditional boiler, which burns gas or oil, a heat pump on electricity and uses natural heat in the air to produce heat.
Make a high-temperature model special, it can transport water temperature up to 75 ° C. This is what you get from a gas boiler, which means it can work perfectly with existing radiators and hot water systems. Standard air source heat pumps usually produce water at about 55 ° C, which sometimes requires a large radiator or fallen heating to function effectively.
With a high-temperature air source heat pump, the owners of the house can enjoy the comfort level in the same way as a traditional heating system, but with better energy efficiency and lower carbon emissions.
Check your Eligibility Now
If you are receiving benefits from the UK Government then you might be eligible for free insulation grants.
Air Source Heat Pump: How It Works
To understand the benefits, it is important to know how the air source heat pump works. The process is based on the simple principle of moving heat from one place to another using a cold cycle. Even when it feels cold outside, there is some heat energy in the air. The pump removes this energy and upgrades it to high temperatures to heat the home and water.
This is how this happens. The outer unit absorbs heat from a cold liquid in the air. This fluid then passes through a compressor, where it gets pressure, which increases the temperature. The hot refrigerant then travels through a heat exchanger inside the unit, where it transfers your heat to your home water system. This hot water rotates through the radiator, pressure, or falling system, which provides frequent heat.
When the refrigerant drops the heat, it cools down and returns to the outdoor unit, ready to start the process again. It is a constant cycle that keeps your home effective, using renewable energy from the air instead of burning fossil fuels.
Advantages of a High Temperature Air Source Heat Pump
One of the main benefits of using a high-temperature air source heat pump is the ability to provide strong heating in low exterior temperatures. It can produce enough water for traditional radiators, making it ideal for older homes that were not originally designed for low-temperature systems.
These pumps also provide significant energy savings. Since they use electricity to move heat instead of generating it, they can produce three times more energy than they consume. This makes them an environmentally friendly alternative that reduces the energy bill over time.
Another advantage is their compatibility. Because they can distribute high temperatures, you do not need to replace your existing radiator or warm water cylinder. This reduces installation costs and makes infection from gas or oil boilers much easier.
They also require very little maintenance. When created by a professional, the system requires minimal service compared to combustion-based boilers. The parts are durable, and most manufacturers provide long guarantees to ensure security.
The noise level is another factor that many consider in homeownership. Modern air source heat pumps are designed to run quietly, and high-temperature models are no exception. The outdoor unit produces minimal sound, equal to an air conditioner.
Finally, there is an environmental benefit. A heat pump helps reduce greenhouse gas emissions, which supports the UK’s goal to move towards net-zero carbon emissions.
Disadvantages and Limitations
While high temperature heat pumps provide many advantages, they also have some disadvantages. Understanding the air source’s heat pump distribution and the disadvantages of high temperatures will help you make an informed decision.
The first is the negative aspect. These systems are more expensive to buy and install than standard heat pumps or gas boilers. However, state subsidies and long-term energy savings often balance this.
Efficiency can also be reduced slightly at extremely low outdoor temperatures. While modern models are designed to perform well in cold weather, they can use more power when temperatures fall below freezing.
Another limitation is the need for proper loft insulation. Although a high temperature air source heat pump produces hot water, it cannot be well insulated, and the heat can easily escape. Therefore, upgrading your insulation before installation can help you get the best performance and energy savings.
Space requirements can also be an assessment. You probably need outdoor spaces for the unit, and there should be good air flow around it.
High Temperature Air Source Heat Pump Price
One of the main questions asked by the owners of the house is about the price of high temperature air source. The total cost depends on several factors, including the brand, the home size, the installation complexity, and any upgrades required for your existing system.
On average, high-temperature air source heat pumps in the UK cost between £ 8,000 and £ 15,000, including installation. Large homes or business properties may require high-capacity systems, which can increase the price.
Although it may look expensive, it is important to see the big picture. Heat pumps can save up to 40% on the annual energy bill compared to electricity or oil heating. Over the years, these savings can cover the starting costs. In addition, government-backed programs such as the ECO4 scheme can make the establishment more financially viable for qualified families.
What is the Best High Temperature Air Source Heat Pump?
When choosing the best system, homeowners often ask: What is the best high temperature heat pump? The answer depends on the size of your property, heating requirements, and budget.
The best heat pump for your home is one that provides the right balance between heating capacity, efficiency, and costs. It is always recommended to consult a certified installer who can evaluate your property and suggest the most appropriate model.
The performance is often measured by the performance coefficient (COP), which indicates how effectively a heat pump converts electricity into heat. Higher police, better efficiency. Some of the latest models have a COP rating of 3.5 or higher, which means they produce 3.5 units of heating for each power unit.
What is the Maximum Temperature for a Heat Pump?
A common question among the owners of the house is what the maximum temperature is for the heat pump? The answer depends on the type of heat pump you choose.
Standard air source heat pumps usually produce water up to 55 ° C, which is ideal for heating during the fall or a large modern radiator. However, high temperature heat pumps can produce water temperatures between 65 ° C and 75 ° C, making them suitable for old radiators and traditional heating systems.
Some models use advanced refrigerants such as R290 or R32, which can effectively reach high temperatures. This means that you can enjoy hot rain, bathrooms, and radiator heating, without any loss of rest or need for major system changes.
The ability to reach high temperatures is that these pumps are set separately, making them an ideal replacement for gas and oil boilers in existing homes.
Frequently Asked Questions
It’s kind of a modern heating system that takes heat from the air outside and make it hotter, like up to 75°C. It works really well for homes that already have radiators or normal hot water systems.
Basically, it catches heat from the air, then use a compressor to make it more hotter, and send that warmth inside your house. Even when it’s cold, it still works fine, which is kinda cool.
Yeah, it can be a bit pricey at first somewhere between £8,000 and £15,000. But there’s help like the ECO4 scheme that can cut down some of that cost, so it’s not that bad in long run.
It’s energy saving, eco-friendly and you don’t have to keep fixing it every now and then. Also, it doesn’t make much noise and it can use the same radiators you already got.
Yes, totally. It can heat your house and water same like a gas boiler but in a more cleaner way. Plus, you’ll spend less on bills over time.
Get Your ECO4 Grant
Simply enter your postal code and answer a few questions, we’ll handle the rest!
Recent Blogs
Share Blog
